| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Type: | Rolling Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model No. | 6×1200 |
| Maximum Plate Thickness (mm) | 6 (for Q235 Steel) |
| Taper Rolling Length (mm) | 1200 mm |
| Plate Yield Strength (MPa) | 245 MPa |
| Top Roll Diameter (mm) | 240 mm |
| Bottom Roll Diameter (mm) | 240 mm |
| Large End Diameter of Taper Roll (mm) | 240 mm |
| Small End Diameter of Taper Roll (mm) | 20 mm |
| Plate Rolling Speed (m/min) | 4 m/min |
| Main Motor Power (kW) | 1.5 kW × 3 units |
| Hydraulic Motor Power (kW) | 3 kW |
The bottom rolls of this machine are drive rolls with fixed positions. The main motor transmits power to the input shaft of the main reducer via a reducer and a coupling set, and then to the two bottom rolls through the output shaft to drive them to rotate. The top roll is also a drive roll, and its vertical movement is driven by the top hydraulic cylinder installed on the frame. After the workpiece rolling is completed, the top roll moves to the middle position between the two bottom rolls and rises to the set height, then the workpiece is unloaded, and one working cycle ends.
When the top roll moves downward to compress the plate, friction is generated between the plate and the rolls, and the rotating bottom rolls feed the plate. An arc can be formed through the three tangent points where the three rolls contact the metal plate, and the descending degree of the top roll can be controlled to achieve the required arc radius.
Steps to perform the operation
1.Feed the metal plate so that it slightly passes the center of the second bottom roll, ensuring the side of the metal plate is perpendicular to the central axis of the bottom rolls.
2 After the top roll descends to the appropriate position, drive the bottom rolls to curl the steel plate, making sure one end of the plate does not detach from the other bottom roll.
3 Repeat the same process after the first curling until the required curling diameter is achieved.
4 Unloading:
(1) Activate the top roll lifting cylinder.
(2) Unload the rolled and formed workpiece.
1. How long have you been in this filed?
We have been in this filed for more than 15 years.
2. Do you have any Certification with product or your factory?
Yes, we have passed TUV certification with our product and factory.
3. Where is your factory?
We are in Shandong province,it is about 150 KM far from Qingdao port.
4. Can we be as your agent in our country?
Yes, if you have this idea, welcome to visit our factory and talk about this, or we fly to visit you.
){kind=link}